Infocus IN100 Manual do Utilizador

Positioning your projector10Obtaining a preferred projected image sizeThe distance from the projector lens to the screen, the zoom setting, and the vi

Positioning your projector 11How to determine the position of the projector for a given screen size1. Select your screen size.2. Refer to the table an

Positioning your projector12Projection dimensionsRefer to "Dimensions" on page 53 for the center of lens dimensions of this projector before

Connection 13ConnectionWhen connecting a signal source to the projector, be sure to:1. Turn all equipment off before making any connections.2. Use the

Connection14Connecting a computer or monitorConnecting a computerThe projector provides a VGA input socket that allows you to connect it to both IBM®

Connection 15Connecting a monitorIf you want to view your presentation close-up on a monitor as well as on the screen, you can connect the MONITOR OUT

Connection16Connecting video source devicesYou can connect your projector to various video source devices that provide any one of the following output

Connection 17Connecting a Component video source deviceExamine your video source device to determine if it has a set of unused Component video output

Connection18Connecting an S-Video source deviceExamine your video source device to determine if it has an unused S-Video output socket available: • If

Connection 19Connecting a composite video source deviceExamine your video source device to determine if it has a set of unused composite video output

Table of contents2Table of contentsIntroduction... 3Projector features... 3Shipping contents ...

Operation20OperationStarting up the projector1. Plug the power cord into the projector and into a wall socket. Turn on the wall socket switch, if appl

Operation 21Using the menusThe projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings.Below is the overv

Operation22Utilizing the password functionFor security purposes and to help prevent unauthorized use, the projector includes an option for setting up

Operation 23Entering the password recall procedure1. Press and hold AUTO on the projector or remote control for 3 seconds. The projector will display

Operation24your retry. You can press MENU/EXIT to cancel the change or try another password.Though the password function is disabled, you need to keep

Operation 25Adjusting the projected imageAdjusting the projection angleThe projector is equipped with 1 quick-release adjuster foot and 1 rear adjuste

Operation26Fine-tuning the image size and clarity1. Adjust the projected image to the size that you need using the zoom ring.2. Then sharpen the image

Operation 27Magnifying and searching for detailsIf you need to look at specific details on the projected picture, magnify the picture. Use the directi

Operation283. Press / to select an aspect ratio to suit the format of the video signal and your display requirements.About the aspect ratioIn the pi

Operation 29Optimizing the imageSelecting a picture modeThe projector is preset with several predefined picture modes so that you can choose one to su

Introduction 3IntroductionProjector featuresThe projector integrates high-performance optical engine projection and a user-friendly design to deliver

Operation30Using Wall ColorIn the situation where you are projecting onto a colored surface such as a painted wall which may not be white, the Wall Co

Operation 31Adjusting ColorHighlight Color in the PICTURE menu and adjust the values by pressing / on the projector or remote control.Lower setting

Operation323D Color ManagementIn most installation situations, color management will not be necessary, such as in classroom, meeting room, or lounge r

Operation 33Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a setting of “0” removes that col

Operation34To cancel the timer, perform the following steps.1. Enter the SYSTEM SETUP: Basic > Presentation Timer menu and highlight Off. Press MOD

Operation 35Freezing the imagePress on the remote control to freeze the image. The word 'FREEZE' will display in the upper left corner of

Operation36Adjusting the sound levelTo adjust the sound level:1. Repeat steps 1-2 above.1. Press to highlight Volume and press / to select a desire

Operation 37Menu operationMenu systemPlease note that the on-screen display (OSD) menus vary according to the signal type selected.The menu items are

Operation384. SYSTEM SETUP: BasicLanguageProjector PositionFront Table/Rear Table/Rear Ceiling/Front CeilingAuto Power OffDisable/5 min/10 min/15 min/

Operation 39Description of each menuFUNCTION DESCRIPTIONWall ColorCorrects the projected picture’s color when the projection surface is not white. See

Introduction4Shipping contentsCarefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contac

Operation40FUNCTION DESCRIPTIONPreset ModePre-defined picture modes are provided so you can optimize your projector image set-up to suit your program

Operation 41FUNCTION DESCRIPTIONPresentation TimerReminds the presenter to finish the presentation within a certain time frame. See "Setting the

Operation42FUNCTION DESCRIPTIONQuick CoolingSelecting On enables the function and the projector cooling time will be shortened to a few seconds.If you

Operation 43FUNCTION DESCRIPTIONVGA OutSelecting On enables the function. The projector can output a VGA signal when it is in standby mode and the D-S

Maintenance44MaintenanceCare of the projectorYour projector needs little maintenance. The only thing you need to do on a regular basis is to keep the

Maintenance 45Lamp informationGetting to know the lamp hourWhen the projector is in operation, the duration (in hours) of lamp usage is automatically

Maintenance46Timing of replacing the lampWhen the Lamp indicator lights up red or a message appears suggesting it is time to replace the lamp, please

Maintenance 47Replacing the lampWARNINGHg - Lamp contains mercury. Manage in accordance with local disposal laws. See www.lamprecycle.org• To reduce t

Maintenance485. Pull out the lamp connector from a slot in the lamp compartment. Disconnect it from the projector as illustrated.6. Lift the handle so

Maintenance 4913. Restart the projector.CAUTIONDo not turn the power on with the lamp cover removed.Resetting the lamp timer14. After the startup logo

Introduction 5Projector exterior view1. External control panel (See "Projector and remote control" on page 6 for details.)2. Vent (heated ai

Maintenance50IndicatorsLight Status & DescriptionPower Temp LampPower eventsOrange Orange OrangeThe projector has just been connected to a power o

Troubleshooting 51TroubleshootingThe projector does not turn on.No pictureBlurred imageRemote control does not workThe password is incorrectCause Reme

Specifications52SpecificationsProjector specifications All specifications are subject to change without notice. GeneralProduct name Digital ProjectorM

Specifications 53Dimensions264 mm x 96.1 mm x 225 mm (10.4” x 3.8” x 8.9”) (W x H x D)Timing chartSupported timing for PC input264 mm (10.4”)225 mm(8.

Specifications54Supported timing for Component-YPbPr inputDisplaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image vibrat

Copyright information 55Copyright informationCopyrightCopyright 2010 by InFocus Corporation. All rights reserved. No part of this publication may be r

Introduction6Controls and functionsProjector and remote control1. Focus ringAdjusts the focus of the projected image. See "Fine-tuning the image

Introduction 78. MENU/EXITTurns on the On-Screen Display (OSD) menu. Goes back to previous OSD menu, exits and saves menu settings. See "Using th

Introduction8Remote control effective rangeInfra-Red (IR) remote control sensor is located on the front of the projector. The remote control must be h

Positioning your projector 9Positioning your projectorChoosing a locationYour room layout or personal preference will dictate which installation locat