Infocus IN5144A Manual do Utilizador descarregar pdf (Página 77)

NETWORK menu

Item Description

WIRELESS

SETUP

(continued)

DHCP

(Dynamic Host

Conguration

Protocol)

Use the ▲/▼ buttons to turn DHCP on/off.

OFF

Select OFF when the network does not have DHCP

enabled. To save the setting, press the ► button.

• When DHCP changes to ON, it takes a little time

to obtain the IP address from DHCP server.

• Auto IP function will assign an IP address if the

projector cannot obtain an IP address from the

server even if DHCP is ON.

IP ADDRESS

Use the ▲/▼/◄/► buttons to enter the IP

ADDRESS.

This function can only be used when DHCP is

OFF.

• The IP ADDRESS is the number that identies

this projector on the network. You cannot have two

devices with the same IP ADDRESS on the same

network.

• The IP ADDRESS 0.0.0.0 is prohibited.

SUBNET

MASK

Use the ▲/▼/◄/► buttons to enter the SUBNET

MASK used by your computer.

This function can only be used when DHCP is

OFF.

• The SUBNET MASK 0.0.0.0 is prohibited.

DEFAULT

GATEWAY

Use the ▲/▼/◄/► buttons to enter the DEFAULT

GATEWAY (a node on a computer network that

serves as an access point to another network)

address.

This function can only be used when DHCP is

OFF.

DNS SERVER

Use the ▲/▼/◄/► buttons to input the DNS

server address.

The DNS server is a system to control domain

names and IP addresses on the Network.

TIME

DIFFERENCE

Use the ▲/▼ buttons to enter TIME DIFFERENCE.

Set TIME DIFFERENCE to match your computer.

If you are unsure what to enter, contact your IT

manager.

Use the ► button to return to the menu after

setting TIME DIFFERENCE.

• When this item is set, TIME DIFFERENCE in the

WIRED SETUP menu will be overwritten with the

same setting (



(continued on next page)

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 122 123

Comentários a estes Manuais

Sem comentários

Infocus IN5144A Manual do Utilizador Página 77

Comentários a estes Manuais

Manuais e produtos relacionados com Projetores de dados Infocus IN5144A