Infocus IN3102 Manual do Utilizador Página 1

IN3102 IN3104 IN3106 IN3108010-0710-03 Regulatory models W3220, W3240 and W3260

9HDTV(High Definition TV)1080i, 1080p, 720pComponent 480iVGAComponent videoComputer 3 or Computer 2Computer 3 or Computer 2 via optional VESA to Compo

10Connecting a computer sourceRequired computer connections (DisplayLink or VESA)If your computer has Windows XP SP2 or newer*, connect the USB cable

11Displaying an imageTouch the Power button.The Power button blinks green and the fans start to run. When the lamp comes on, the start up screen displ

12Adjusting the imageIf necessary, adjust the height of the projector by pressing the elevator foot release button to extend the foot.If necessary, ro

13Connecting a video deviceYou can connect video devices such as VCRs, DVD players, camcorders, digital cameras, video game consoles, HDTV receivers,

14Video device connectionsNo video cables are provided with the projector. You can order cables from InFocus or provide your own.Composite video conne

15Shutting down the projectorThe projector automatically displays a black screen after no active source is detected for 30 minutes. This black screen

16Problem Solution ResultNo start up screenPlug power cord into the projectorpress power buttonCorrect imageOnly start up screen appearsIf your compu

17Prolem Solution ResultNo computer image, just the words “Signal out of range” Press the Auto Image button on keypad adjust computer refresh rate in

18Image fuzzy or cropped Set your computer’s display resolution to the native resolution of the projector (Start > Settings > Control Panel >

1Declaration of ConformityManufacturer: InFocus Corporation, 13190 SW 68th Parkway, Portland, Oregon 97223-8368 USAWe declare under our sole responsib

19Image not square Adjust Keystone on keypad Square imageImage not sharp Adjust Sharpness in the Basic Picture menu Correct imageImage does not fit 4:

20Image upside down Turn off Ceiling Mount in Setup menu Correct imageImage reversed left to right Turn off Rear Project in Setup menu Correct image P

21The video embedded in my PowerPoint presentation does not play on the screenIf your computer is using the projector's DisplayLink connector, se

22Still need assistance?If you need assistance, visit our website at www.infocus.com/service or call us. Check out our HOW TO section there for additi

23Using the remote controlThe remote uses two (2) provided AA batteries. They are easily installed by removing the cover from the remote’s back, align

24Using the audioUsing the projector’s speakersWhen the computer is using the DisplayLink connector, both audio and video are sent over the USB cable

25Using the keypad buttonsMost buttons are described in detail in other sections, but here is an overview of their functions:Power–turns the projector

26Optimizing computer imagesAfter the projector is running and the image is on the screen, you can optimize the image using the onscreen menus. For ge

27Optimizing video imagesAfter your video device is connected properly and the image is on the screen, you can optimize the image using the onscreen m

28Using the menusTo open the menus, press the Menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are p

2Table of ContentsIntroduction 3Positioning the projector 5Projector and device connector guide 6Connecting a computer source 9Required computer co

29Basic Picture menuTo adjust the following settings, highlight the setting, press Select, use the up and down arrows to adjust the values, then press

30Advanced Picture menuBrilliantColor™: produces an expanded on-screen color spectrum that delivers enhanced color saturation for bright, true-to-life

31Setup menuLanguage: allows you to select a language for the onscreen display.Key Click: turns the key click sound on or off. When this setting is on

32contains captions on the selected channel, then the projector must display caption text overlaid on the image.Ceiling Mount: turns the image upside

33Status and Service menuSource Info: a read-only display of current source settings.Projector Info: a read-only display of current projector settings

34MaintenanceCleaning the lens1 Apply a non-abrasive camera lens cleaner to a soft, dry cloth.• Avoid using an excessive amount of cleaner, and don’t

35Replacing the projection lampThe Lamp Hours timer in the Projector Info menu counts the number of hours the lamp has been in use. Twenty hours befor

364 Loosen the captive screws that attach the lamp housing to the projector. Carefully remove the lamp housing. Dispose of the lamp in an environmenta

37INDEXNumerics16x9 vs 4x3 125 volt DC output 4AAC Power On 30Advanced menu 29Apply Preset 28Aspect Ratio 12, 28, 30Audio In Computer connector 9Audio

38Overscan 29, 30PPhase 29Picture menu 28Power connector 9power cord 9Power Sounds 30Power-up Source 30Presentation features 25Projection distance 5Pr

3IntroductionYour new digital projector is simple to connect, easy to use, and straightforward to maintain. It is a versatile projector that is flexib

4Connector panelThe projector provides both computer and video connection options, including:•VESA computer (2)• HDMI, for computer (1) and for video

5Positioning the projectorTo determine where to position the projector, consider the size and shape of your screen, the location of your power outlets

680/2.0 9.7/2.9 8.7/2.790/2.3 10.9/3.3 9.8/3.0150/3.8 18.1/5.5 16.3/5.0Table 2: (IN3106 & IN3108)Range of distance to the screen for a given scree

7Projector and device connector guideThe following illustration and table should help you find the connectors to use and obtain the best resolution po

8Video Device Video CompatibilityIf Your Device Connector IsAttach to Adapter or Labeled Connector on ProjectorFor Setup Instructions, see CommentsSta